ZSARKA
zagros

Catalyst Handling Services

Catalyst Handling Services

Catalyst Handling Services

Catalyst Handling Services

Zagros Sanat Arka Co. Companies takes full responsibility for the entire catalyst handling process in the mining, metal smelting and mineral processing industries including:
  • Catalyst un-loading
  • Catalyst screening
  • Catalyst reloading

Catalyst Handling Services

Catalyst Screening eliminates process dust, catalyst fines and small catalyst particles generated over time which affects the catalyst reaction’s surface area.
The frequency of this process varies from plant to plant depending on their operational challenges, life of the catalyst and other technical matters.
In addition to catalyst handling services, the company provides a range of complementary services to the sulphuric acid plants including:
  • Corrosion Protection and Control
  • Acid Proofing
  • Industrial Lining and Coating applications
  • High and Ultra High Pressure Cleaning of heat exchangers, Tanks and Vessels
  • Catalyst supply and stock holding
Zagros Sanat Arka Co. Companies; underpinned by 4 years of experience in providing specialist furnace and industrial services to mining and petrochemical refining industries

SCOPE OF SERVICES

Catalyst Handling Services

Catalyst Unloading

Catalyst unloading is a technical and specialized skill requiring a broad understanding of all safety requirements and experience in convertor loading sequence.
Through excellent project planning, monitoring, control, communication, coordination and management,
Zagros Sanat Arka Co.  ensures that catalyst layers are separated according to age and or type without cross contamination, harm to personnel and endangering the convertor structural integrity.
Our team of experts pay critical attention to the equipment set-up, manpower movements on catalyst surface inside convertors, vacuumation suction pressure and catalyst velocity to avoid breakage.
Special barriers are constructed inside convertors for personnel movements while vacuuming to avoid catalyst damage.
The Vacuum suction air velocity is carefully monitored and maintained to eliminate catalyst breakage.
In addition the team ensures that all ceramic ball layers are vacuumed separate from the catalyst handling services.

Screening and Materials Handling

Catalyst Handling Services

Catalyst Screening is a major factor to the success of the entire catalyst handling service. If equipment is not well designed and selected, catalyst damage may occur resulting in losses for the client in addition to the inherent down time incurred during catalyst handling service.
Zagros Sanat Arka Co. equipment and experience guarantees clients safer, efficient, faster and environmentally friendly catalyst screening that eliminates catalyst damage and reduces costs.
Our competent technical and field team conduct a successful screening campaign backed with the correct plant data and screen mesh selection.
The division stocks a wide range of standard screen sizes including; 18mm, 15mm, 12mm, 10mm, 8mm and 3mm.
During the catalyst screening process the screen condition is constantly monitored in order to maintain consistent quality and particle size grade in every batch.
The process involves removal of material accumulation in the dividing plates under the grids.
Furthermore, all the meshes are then inspected and replaced based on the prevailing condition.
Dickinson Group takes material handling as a very critical ingredient to achieving a successful catalyst handling and Acid Plant Convertor operations.
Every bag from a specific pass and layer of the convertor is well labelled and stored/stack in a well-defined specific area.

Loading

Catalyst Handling Services

Internal convertor inspections, maintenance and repairs are critical to a successful plant shutdown.
All necessary works must be undertaken before catalyst loading is performed.
Clients have to certify convertor internal condition and authorize the contractor to continue with the catalyst loading.
Quality assurance is critical during the loading process in the same manner as the complete catalyst handling process and our Quality Engineers are responsible for monitoring and controlling the quality of works during the entire process.
Loading and levelling of ceramic balls and the catalyst as per loading diagram is monitored and controlled.
The desired catalyst layers and measurements, depending on the type and age are pre-marked on the Convertor walls before loading begins.
As the Catalyst is hygroscopic in nature, exposure to the environment and moisture is must be limited and strictly avoided.
Zagros Sanat Arka Co. engages the client throughout the loading process ensuring even distribution of ceramic balls and catalyst on each bed. Our loading team move on ply wood boards to avoid catalyst breakage.
We eliminate breakage, channeling and higher pressure drops due to loading errors.
In conclusion our team prepares and submits the final loading diagram and report to the client upon completion of works.

Quality Control

Catalyst Handling Services

Quality monitoring, control and assurance takes centre stage in all catalyst handling activities. Strict quality controls are observed aimed at zero error and satisfying the client.

Safety

Safety is our highest priority. Catalyst Material Safety Data Sheets guides our team in the preparation of the essential safety consideration and controls.
Strict and mandatory safety precautions are observed during the entire catalyst handing process.
All the catalyst remains and residue are stored in specific containers as recommended by local and international health, safety & environmental regulations.

EQUIPMENT AND INNOVATIONS

Catalyst Handling Services

Zagros Sanat Arka Co. has a range of state of the art heavy duty industrial vacuum systems and catalyst screening equipment to meet the technical needs of the specialized catalyst handling.
The equipment is well able to perform catalyst unloading, screening and loading service. With experienced, trained and specialized manpower, timely and professional service delivery.
The equipment includes; environmentally friendly convertor catalyst vacuum and screening units with all other accessories.

INDUSTRIES

Catalyst Handling Services

The company has undertaken large projects across the complete range of mining, metals smelting, mineral processing, chemical, refining and thermal power industries including:
Aluminium
Glass
Iron, Coke and Steel
Copper
Cobalt
Heavy Sands
Nickel
Power Plants
Cement & Lime
Chemical & Petrochemical
Power Generation
Vanadium
Ceramic
Refractory Manufacturing

 

Catalyst Handling Services



19 , June

mohamad akhbari